60-87 Extreme Front Dropmember

This gallery contains 1 photo.

Description: The Porterbuilt Dropmember is a bolt-in front suspension system designed to eliminate all the drawbacks traditionally associated with extreme lowering of the 60-87 Chevrolet trucks. It is available for the C10, C20, and C30 chassis. Its improved/revised suspension geometry …

More Galleries |

60-87 Touring Front Dropmember

This gallery contains 1 photo.

Description: The Porterbuilt Dropmember is a bolt-in front suspension system designed to eliminate all the drawbacks traditionally associated with extreme lowering of the 60-87 Chevrolet trucks. It is available for the C10, C20, and C30 chassis. Its improved/revised suspension geometry …

More Galleries |

60-87 Mild Front Dropmember

This gallery contains 1 photo.

Description: The Porterbuilt Dropmember is a bolt-in front suspension system designed to eliminate all the drawbacks traditionally associated with extreme lowering of the 60-87 Chevrolet trucks. It is available for the C10, C20, and C30 chassis. Its improved/revised suspension geometry …

More Galleries |

73-87 Rear Extreme Dropmember

This gallery contains 1 photo.

Description: This mostly bolt-in rear suspension system for the 73-87 C10 trucks allows the truck to lay frame on up to a 31″ tall tire. It’s modular design makes installation straight forward and intuitive, and the quality and craftsmanship is …

More Galleries |

73-87 Rear Mild Dropmember

This gallery contains 1 photo.

Description: This mostly bolt-in rear suspension system for the 73-87 C10 trucks allows the truck to be 3″ off the ground using a 30″ tall tire. It’s modular design makes installation straight forward and intuitive, and the quality and craftsmanship …

More Galleries |

73-87 Trailing Arm Rear Deluxe Kit

This gallery contains 1 photo.

Description: The Porterbuilt Stage 2 Rear “Deluxe” Kit for 73-87 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it …

More Galleries |

63-87 Stage 1 Front Kit

This gallery contains 1 photo.

Description: Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace …

More Galleries |

73-87 Two-Piece Bolt-in C-Notch Assembly

This gallery contains 1 photo.

Description: This two-piece bolt-in notch assembly is designed to fit the contour of the 1973-1987 chassis. It’s two-piece design aids in both installation and overall strength of the design. This is the same notch we use in our Trailing Arm …

More Galleries |

73-87 Bolt-On Step Notch Assemblies

This gallery contains 1 photo.

Description: These bolt-in step notch assemblies are designed for the 1973-1987 C10 chassis and will allow the truck to lay out on a 31″ tall tire. They are the same step-notch assemblies we use with our Dropmember Rear Kit, and …

More Galleries |

63-87 Tubular Control Arms

This gallery contains 1 photo.

Description: Looking to upgrade to a set of tubular control arms? Then look no further. Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups …

More Galleries |

1.25″ OD Heavy Duty Sway Bar

Description: This 1.25″ OD solid sway bar is manufactured specific for Porterbuilt, and is available for factory crossmember and Dropmember equipped trucks. It comes powdercoated black and includes all mounting hardware.

More Galleries |